How the penis enlargement pump works

Many men are dissatisfied with their penis parameters and do not want to endure it. Therefore, various techniques are used to help make the penis thicker and longer. Devices such as penis enlargement pumps are also widely used.

How the equipment works

The pump is a cylindrical device. The device is designed to increase the length and width of the male penis, as well as increase erection.

The working principle of the pump is very simple. When used, the pressure around the male penis will increase, which helps increase blood flow and fill the cavernous body with blood. The same thing happens with an erection. The penis quickly hardens and swells, which allows you to increase its parameters.

Pumps and pump varieties

Penis enlargement pumps, no matter what type, have a single structural principle. It is a transparent flask with centimeters on it. There are also devices that can generate vacuum and maintain the required pressure.

There are three types of pumps:

  1. Manual. The vacuum is created using pistons or bulbs. This type of equipment costs less, so it is often used. However, men have to wait a long time to see the effect of use.
  2. Automatically. With this type of pump, the pressure in the flask is generated by the electric pump already built into the device. It needs batteries to work. Automatic devices are preferable because they are highly efficient and they allow you to control pressure and suction.
  3. Aquatic. The latest pump. The difference is that it uses water instead of air. This type of amplifier is safer, more effective, has almost no contraindications and lasts longer than previous models.

There are two ways to pump water. The first is called packaging. Its essence is to stretch the tunic and increase the length of the penis, not the width. For this, use a narrow bottle in which the penis will not swell to the sides, but will stretch upwards.

The second method is the classic pumping. In this case, a wide ball is used in which the penis has the ability to expand in all directions. This allows you to increase the width and length of the organ.

Selection criteria

When choosing to increase the pump, consider the size of the penis and its purpose. Expert recommendations are as follows:

  1. The length of the device should be about 3 cm long.
  2. The width should be 2 cm larger than the diameter of the penis.
  3. For beginners, it is recommended to choose a manual type of equipment, because it is the simplest.

The above penis size is only considered when excited.

During the purchase process, you should pay attention to the materials used to make the amplifier. The bulb must be strong enough to avoid accidental damage to male organs.


Men with the following diseases are not allowed to use the vacuum amplifier:

  1. Thrombosis.
  2. Fibrosis.
  3. Liver disease.
  4. Kidney disease.
  5. Diabetes.
  6. Pathology of the heart and blood vessels.
  7. Sexually transmitted diseases.
  8. Urinary organ dysfunction.

If a man is not sure whether he can use a pump to increase the length and width of his penis, it is worth seeing a doctor for examination.

Pros and cons

Vacuum pumps not only make men's dignity longer and broader. The device also helps to improve erectile function and prolongs sexual intercourse by reducing organ sensitivity. In addition, the device allows you to correct the shape of the penis even if there is curvature.

The disadvantages of pumps only appear when they are used improperly. Failure to follow the instructions can lead to many unpleasant consequences.

Use effect

If you use the pump frequently, the penis will change its size forever after 6 months. In order to achieve the maximum effect, it is recommended to take drugs that increase the production of male sex hormones at the same time. But this can only be done after consulting a doctor.

Use a penis enlargement pump

Those who have tried the pump noticed that they were able to achieve the desired result. After six months, the length of the penis has increased by 3 cm and the thickness has increased by 2 cm.

Instructions for use

You don't need any special skills to enlarge your penis with a vacuum pump. Before the operation, the device should be lubricated with lubricant to ensure sliding.

Male members need to be lubricated with a special cream, whose role is to normalize blood flow and increase blood flow to the penis.

Then put the penis into the cylinder. Remove air from the flask to create a vacuum environment. Once the skin turns red, you need to wait 30 seconds and start ventilation. The process should last no more than 15-20 minutes.

Possible consequences

It is not meaningless to have special instructions for the use of the pump. Performing all operations strictly in accordance with it can avoid undesirable consequences. But sometimes men break the rules.

As a result, instead of the required centimeters, you get the following:

  1. A swelling ring appears at the bottom of the head of the penis. This is due to stagnation of lymph fluid. This phenomenon can occur even if vacuum equipment is used correctly. If you observe such side effects, you should stop using the device.
  2. The penis swells due to the influx of a large amount of lymph fluid.
  3. Deterioration of erectile function.
  4. The penis is red and bleeding.
  5. Thrombosis. This disease poses a huge threat to human life, but it is extremely rare when pumps are used.

In order to avoid negative consequences, it is not only important to use the pump correctly. It is also necessary not to ignore the existence of contraindications to its use. If so, then you should look for other ways to enlarge your penis.

Homemade equipment

For men who don’t want to spend money on factory amplifiers, they have the opportunity to make them at home.

Pump from the cuff

To create an air-free environment, you need to unscrew the cuff pump and turn the cuff upside down. Then you need to reassemble the equipment, but in the reverse order.

Next, you need to make a valve that is designed to release excess air. For this, you can use the valve of the aquarium compressor. It must be connected to the pump hose and sealed.

From the compressor

You can remove the compressor from unnecessary refrigeration equipment. After removing the evaporator and condenser, cut off the pipe connecting them. Then connect the compressor to the power source.

Penis vacuum pump kit

Buy an air filter from any car store. It needs to be connected to the compressor port. The filter must be connected to a rubber hose of the required size. Then it is left to try the actions of the device.

Use syringe

Take a plastic tube, cut out three pieces of 10 cm each, and stick them on the T-shirt. The result is a T-shirt with three taps.

Connect the syringe nozzle to the central outlet. Install the valve on the finished side outlet.

In this case, it is important that one opens upward and the second opens inward. In order not to be confused in the future, you should draw arrows that indicate the direction of the air.

Use plastic bottles

A fairly simple penis enlargement pump can be made from ordinary plastic bottles. It is important to choose containers of different sizes. For larger ones, you need to cut off the upper part to get the shape of a cylinder.

Punch a hole in the bottom of the second bottle and insert it into the first container. It is important that no large gaps are formed between the walls. Then you need to connect the hose to a large container. You can get it from a bicycle wheel pump.

Equipment maintenance

In order to maximize the service life of the magnifying glass, it must be properly maintained. If the equipment has just been purchased and has not been used yet, it is necessary to wash it thoroughly with soap, then dry it and treat it with any preservatives. The equipment needs to be further cleaned after each use.

Do not treat the pump with hydrogen peroxide or boiling water, or use fat-containing grease in the process. Otherwise, the risk of damage is high.